Sika Film

Sika Film 205ltr

Rated 0 out of 5
0 reviews

$1,155.22

Evaporation Control and Finishing Aid LIQUID

Sika® Film is a 1-part liquid which controls the moisture evaporation from the freshly cast concrete flatwork surface in addition to functioning as a finishing aid.

  • Eliminates the need to add water to low slump concrete or spraying water on the concrete surface to aid finishing
  • Good finishing aid to fresh concrete for extra smooth and durable concrete floors
  • Reduces plastic shrinkage cracking caused by evaporation in low humidity conditions such as heat and high winds
− +
Add to wishlist Add to compare
Category:

Description

Film

Usage

  • All applications where a superior finish is required on concrete flatwork
  • Protects concrete from the effects of excessive moisture loss in rapid drying conditions

Advantages

  • Eliminates the need to add water to low slump concrete or spraying water on the concrete surface to aid finishing
  • Good finishing aid to fresh concrete for extra smooth and durable concrete floors
  • Reduces plastic shrinkage cracking caused by evaporation in low humidity conditions such as heat and high winds
  • Finishing aid to fresh concrete that produces little or no bleed water, such as microsilica or air entrained mixes

Packaging

205-litre drums

Colour

Blue liquid

Product Information

 

Shelf life

24 months from date of production

Storage conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between  +5 °C  and  +35 °C. Always refer to packaging.

Density

~1.0 kg/litre approx.

Application Information

Equipment

Equipment used to mix and apply  Sika® Film should be washed immediately after use with water.

Consumption

 

Consumption

When diluted at a ratio of 1:8, 10 litres will yield 90 litre of liquid.Depending on surface profile and texture the total diluted material covers an area of approximately 35-90 m2. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc. Dosage rates outside the recommended range may be used when project conditions require special consideration. Contact Sika Technical Services for additional information.

Application steps

 

APPLICATION

Dilution

Thoroughly mix 1 part Sika® Film with 8 parts of water by volume.

Finishing Aid

Apply the diluted Sika® Film solution with a fine mist sprayer as soon as possible after placing concrete and before floating and trowelling operations.

Evaporation Control

Apply the diluted Sika® Film solution with a fine mist sprayer as soon as possible after floating and trowelling operations.

 

Sika Film Safety Data Sheet (SDS)
Sika Film Product Data Sheet (PDS)

Additional information

Packaging

10-litre pails, 205-litre drums

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Sika Film 205ltr”

Your email address will not be published. Required fields are marked *

FAQ

Content missing

Sika Film 205ltr

$1,155.22

Add to cart